RackBoss 2.0 Changes the Game
Every rack gets soft eventually. It can take years or longer, but eventually your steering responsiveness is going to go to crap, and controlling your RZR is going to get tough. That’s where SuperATV’s RackBoss 2.0 Rack and Pinion for the Polaris RZR Trail 900 changes the game. It’s an upgraded version of our original RackBoss that uses our X24 Tech to boost durability like never before. X24 is a dual-bushing design that reduces wear by over 50% compared to stock, and you can’t get it anywhere else. Install RackBoss 2.0 on your ride, and control your machine no matter what.
Boosted Durability with Our Dual-Bushing Design
The secret sauce behind RackBoss 2.0’s unbeatable durability is our unique X24 Tech. It puts heavy-duty PTFE bushings at both ends of the rack to reduce internal play and keep the tension spring nearly motionless. That makes it easy to run massive tires on huge lifts across the most treacherous terrain without wrecking your rack. Plus, the built-in grease fitting makes it easy to keep everything running smooth.
Swaged Tube Tie Rods
Our swaged tube tie rods are lightweight but tough. Their signature flare-out design boosts their strength beyond what the 7/8” diameter tubing could achieve otherwise. They’re made even tougher with our beefed-up tie rod ends. Our heim joint outer tie rod ends use 3/4” rod threads, and our rebuildable inner ball and sockets use 3/4” rod threads along with 16 mm rack threads. They’re as tough as they come.
Solid Steel Bar Tie Rods
For a beefy tie rod setup, you want to go with solid steel bar tie rods. They’re made with 1” diameter steel bars that are paired with bigger, better tie rods you’ll love—3/4” outer heim joint tie rods and rebuildable inner tie rods that use 3/4” rod threads and 16 mm rack threads. Altogether, they’re built for hard hits, big tires, and wild rides.
Every rack gets soft eventually. It can take years or longer, but eventually your steering responsiveness is going to go to crap, and controlling your RZR is going to get tough. That’s where SuperATV’s RackBoss 2.0 Rack and Pinion for the Polaris RZR Trail 900 changes the game. It’s an upgraded version of our original RackBoss that uses our X24 Tech to boost durability like never before. X24 is a dual-bushing design that reduces wear by over 50% compared to stock, and you can’t get it anywhere else. Install RackBoss 2.0 on your ride, and control your machine no matter what.
Boosted Durability with Our Dual-Bushing Design
The secret sauce behind RackBoss 2.0’s unbeatable durability is our unique X24 Tech. It puts heavy-duty PTFE bushings at both ends of the rack to reduce internal play and keep the tension spring nearly motionless. That makes it easy to run massive tires on huge lifts across the most treacherous terrain without wrecking your rack. Plus, the built-in grease fitting makes it easy to keep everything running smooth.
Swaged Tube Tie Rods
Our swaged tube tie rods are lightweight but tough. Their signature flare-out design boosts their strength beyond what the 7/8” diameter tubing could achieve otherwise. They’re made even tougher with our beefed-up tie rod ends. Our heim joint outer tie rod ends use 3/4” rod threads, and our rebuildable inner ball and sockets use 3/4” rod threads along with 16 mm rack threads. They’re as tough as they come.
Solid Steel Bar Tie Rods
For a beefy tie rod setup, you want to go with solid steel bar tie rods. They’re made with 1” diameter steel bars that are paired with bigger, better tie rods you’ll love—3/4” outer heim joint tie rods and rebuildable inner tie rods that use 3/4” rod threads and 16 mm rack threads. Altogether, they’re built for hard hits, big tires, and wild rides.
| RackBoss 2.0 Swaged Tie Rod | RackBoss 2.0 Solid Steel Tie Rod | |
| X24 Tech Dual-Bushing Design | ✔ | ✔ |
| Inner Ball and Socket Thread Diameter | 14 mm rod threads, 16 mm rack threads | 3/4” rod threads, 16 mm rack threads |
| Outer Tie Rod End Thread Diameter | 14 mm | 3/4” |
| Tie Rod Material | Steel tube | Solid steel bar |
| Greasable | ✔ | ✔ |
| Inner Boots | ✔ | ✔ |
| Steering Stop Kit | ✔ | ✔ |
| Misalignment Bushings, Tie Rod Studs, & Hardware | ✔ | ✔ |
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
- Heavy-duty dual PTFE bushings:
- Designed with X24 Tech
- Prevents wear
- Reduces slop
- Improves overall durability
- Available tie rod options:
- Steel swaged tube
- Solid steel bar
- Solid steel tie rods use:
- 3/4” outer tie rod ends
- Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
- Swaged tube tie rods use:
- 14 mm outer tie rod ends
- Inner tie rod ends that use M14 rod threads and 16 mm rack threads
- 65% larger housing than stock
- Over 50% less wear than OEM after 15,000 cycles
- Grease fitting for rack gears
View and download the instructions on how to install this part for your machine.